Calculator collection
Concrete & Masonry Calculators
Estimate concrete and masonry quantities in purchase-ready units, with waste, reinforcement, base material, and formwork assumptions shown.
Start with the project
Featured concrete & masonry calculators
These focused tools cover the most common starting points in this trade. The complete searchable collection remains below.
Concrete Calculator →Concrete volume, bags, ready-mix rounding, base, and costs for seven shapes.Concrete Footing Calculator →Concrete yards, bags, and cost for continuous or repeated footings.Concrete Block Fill Calculator →Estimate grout volume and bag counts for partially or fully filled concrete block walls.Rebar Calculator →Grid bar counts, stock lengths, weight, and cost from a specified layout.
12 calculators available
Concrete & Masonry12
Asphalt CalculatorHot-mix tons, gravel base, truck loads, and project cost.Brick & Block CalculatorBrick or CMU units, mortar, pallets, openings, ties, weight, and cost.Concrete CalculatorConcrete volume, bags, ready-mix rounding, base, and costs for seven shapes.Concrete Bags CalculatorConvert a slab or project volume into whole bags and cost.Concrete Block Fill CalculatorEstimate grout volume and bag counts for partially or fully filled concrete block walls.Concrete Footing CalculatorConcrete yards, bags, and cost for continuous or repeated footings.Concrete Stairs CalculatorCalculate concrete volume, bags, and cost for straight monolithic steps and an optional landing.Concrete Weight CalculatorEstimate concrete weight and payload loads from volume, dimensions, and editable density.Mortar CalculatorMortar volume, bags, and cost for brick and block walls.Rebar CalculatorGrid bar counts, stock lengths, weight, and cost from a specified layout.Retaining Wall CalculatorBlocks, caps, gravel, drainage, weight, and cost for segmental walls.Sonotube Concrete CalculatorConcrete volume and bags for round form tubes and columns.
What these estimates include
Use these tools for early takeoffs and supplier conversations. Concrete strength, reinforcement, bearing, frost depth, and structural details still require the approved plans and adopted local code.
Need a different trade? Browse every CountStruction calculator.